DIY White Clay Glitter Christmas Ornaments

Christmas DIY Ornaments (1)
How to make easy white clay ornaments with a little glitter
Each year I try to find time to make some Christmas ornaments together with my kids. It’s kind of tradition. Once we made ornaments out of citrus fruits, but mostly, we make ornaments out of dough. But I really didn’t like the salt dough most people recommend. The shapes would not be clean and the colors weren’t what I wanted. So, I tried a white dough, which only needed three ingredients and they really turned out amazing! Exactly like I wanted them to. Here is how we made them…
DIY White Clay Ornaments
DIY White Clay Ornaments

For the white Christmas ornaments you will need:

– white dough
– ribbon (I used a red one with white dots)
– snowflake cookie cutter (or whatever shape you like more)
– plastic straw for making the holes
– baking paper
– sealer (optional, I used a spray sealer)

To make the white dough you will need these easy to find ingredients:

– half cup cornstarch
– one cup baking soda
– 3/4 cup water
– 1/3 cup glitter (or more if you want) – optional
– damp paper of fabric towel
DIY White Clay Ornaments and Santa

How to make the white ornament dough:

  • To make the dough, just take a pot and mix the cornstarch with the baking soda and the glitter. Add the water and stir the mixture until you will have a smooth but still runny cream. Take the pot and put it on your stove on low to medium heat and stir all of the time. As you stir and time passes, the mixture will start to get thicker.
  • As soon as it resembles a dough consistancy (more like mashed potatoes) take the pot from the heat and cover it with a damp fabric or paper towel.
  • Wait 10 to 20 minutes (or more) until it has cooled down. When it has cooled you can take the dough and knead it until it becomes a smooth, soft dough. Now you can roll it out (I lined some baking paper on my working surface) and cut out your snowflakes (or whichever shape you chose).
  • Don’t roll it out too thin or your diy christmas ornaments will break easily, but don’t make them too thick either, since they will take longer to dry and they could also break easier because of that. 1/4′ thick should be good.
  • Make holes using the straw. Transfer the snowflake ornaments to a pan which lined with some baking paper.
  • Now it’s time for drying. You can either let them over night air dry (as I did) or maybe you could try drying them in the oven on low temperature for a couple of hours (didn’t try this, so I don’t know for sure!). As they dry, you will need to carefully turn them over from time to time.
  • Once they are dried you can use fine sanding paper to smooth out the edges and you and your kids can paint them, stamp them or leave them white as they are like I did and you can add a sealer to make them more resistant.
You can find lots of videos or step by step photo tutorials on how to make this white clay online if you want to do more research.
My kids painted them and added their own ribbons and used theirs as gift tags for their Christmas presents, as well as for decorating their cookie treat bags we would left out for Santa!
Add the ribbon you like and there you have your very own Christmas ornaments!
As I love red and white Christmas decorations, I bought some red and white christmas balls for our tree and these white snowflake ornaments with the red ribbon are just perfect. The white snowflakes  with the red ribbon make a great contrast and they look great on the tree!! I think this year, after making these wonderful foam glitter photo ornaments, I will make some of the other ideas I found on Pinterest as well, using the same recipe. I would really love to make some of these angel ornaments with my kids! Aren’t they cute?



How we made foam glitter photo ornaments

Hello everyone!

We continue making some Christmas crafts. One of my favorites each year is to make ornaments. We have made ornaments out of citrus fruits and out of clay in the past, so this year I wanted to do some photo ornaments. They needed to be easy and cheap, since we wanted to make a lot. I want them to be gifts for grandparents and friends, as well as for children from our kindergarten.


glitter foam photo ornaments materials
Some of the glitter foam photo ornaments materials you will need

I searched online and tried a few things. The idea I finally chose was to make some easy foam glitter photo ornaments!

So here is what you need to make them:

  • Foam glitter sheets. I chose white ones, but you can pick any color you think will go with your tree! I think silver, gold, red or green glitter foam sheets would be great choices, too!
  • Your frame template (you can find a lot of frame templates online and just choose what you like most. A bubble ornament shape, rectangles, ovals, stars, hearts or one like I used – you can find it here – are all great ideas). You can make one by yourself, too, by drawing it on cardstock or by even using different sized cookie cutters as a guide.
  • Cardstock
  • Silicon glue gun
  • Ribbon
  • Scissors (or craft knife), pencil and ruler
  • Your favorite photos, printed dimensions 6×4,5 cm (height x width)

To make them:

First adjust your template so it will be the size of your choosing (and capable of framing your photos). I made mine so they would suit my 6×4,5 cm photos. Next, print out your templates on cardstock. You can print two templates – one to make your frame and the other to leave without cutting out the inner shape.

glitter foam photo ornaments template
Prepare your template by simply drawing or printing them onto cardstock and cutting it out

Now it’s time for the glitter foam (I love that stuff!).

glitter foam ornaments
You can use any glitter sheets, but I used a glitter foam sheet that has only on one side glitter

Using your template, pencil, scissors and ruler, cut out two pieces, one frame and one back side for each photo. To cut the inside piece, I used the knife to make a “x” first, so it was easier to use the scissors afterwards.

glitter foam photo ornaments diy
To make cutting out the inner piece easier, I made a “x” first
glitter foam photo ornaments frame
For each photo you will need one glitter foam frame and one glitter foam back side

Using your hot glue gun, glue your ribbon to the non-glitter side of your back side piece. Next, glue your photo onto the same non-glitter back side piece. Finally, put some hot glue on the back of your frame piece and glue it onto the back side piece, so you will end up with a frame that both front and back is glittery.

hot glue foam glitter ornaments
Final step: glue the frame onto the simple foamy back side of your ornament

Let it dry, cut off any excesses, remove any silicon residue and your beautiful Christmas ornament is ready to be given away or hung on your tree and bring joy!

I really loved how they turned out and they look so great on our tree! The kids loved them, too, as they got to choose their photos and hang them on the tree and they are really easy to make! I used black and white photos as well as colored ones and they all look gorgeous. You could also add some decorations to the frames and make them even more fun!

glitter foam ornaments christmas tree
My kids’ glitter foam ornaments, on the tree!

Try making them for loved ones or just to add to your family Christmas craft traditions! They will make a wonderful keepsake for many many years!!!

Our DIY Advent Calendars

Every year as December begins, we prepare advent calendars for our kids. Sometimes we take the easy road and get some of those chocolate count down calendars as well, what can I say!

Our book advent calendar

It has become kind of a family tradition to make a book advent calendar. It’s easy and kind of inexpensive, since we use a lot of loved and treasured books as well as a few new ones. I also include some Christmas activity books and even a Christmas Recipe booklet for kids – we will be making a lot of cookies I can tell you! You just wrap the books up and number them and open one book each day! It’s super fun and the kids really love it!! And so do I to be honest!!

You can use whatever paper you want to wrap them…after all, it’s the book that counts!

The other advent calendar we made this year was my husband’s idea and he did all the work! He used cardboard and toilet paper tubes to make it! In each tube he placed a couple of treats, chocolates mostly, and a small piece of paper. On the paper he added a variety of “coupons” and activity suggestions that we can do on that day. The first was to decorate the actual calendar! We have coupons to watch a movie, make some DIY ornaments, bake Christmas cookies, sleep all together in the big bed, make some Christmas crafts and so on. The kids are really excited and can’t wait to open all of the surprises!


These calendars are really easy to make and all you need is some inspiration and to put love into them! Here are some other ideas to make DIY Advent Calendars, there is still time!!!

diy advent calendar
Rustic and easy DIY Advent Calendar (image source: Pinterest)
advent calendar buckets
DIY Advent Calendar using cute buckets (image source)

DIY Easy Canvas Art Project with Painters Tape for Kids

While I am not the most artistic person, I try to keep my kids creative and so I am always searching for some easy art projects, especially on rainy days. One project I liked specifically, was painting a canvas using paint and painters tape. It is really easy, and the results are great! You can choose whatever colors you think will complement your home or use metallic colors for vibrant art work. The possibilities are endless.

painters tape diy canvas art
Painters tape diy canvas art

You will need:

  • Paint brushes
  • Various paint colors
  • Painters tape
  • Canvas

You can begin either by painting your canvas with a base color and leave it to dry or leaving the canvas plain white. Tape pieces of painters tape in any way you want, covering the canvas edge to edge. You can keep it symmetrical, geometrical or just chaotic.

painters tape star canvas art
Painters tape star canvas art

Next, choose your colors and paint each distinctive part in the color you want. The paint will help you keep the edges clean, but try not to get into other parts of the canvas. Let it dry completely and carefully remove the painter’s tape. And voila! There you have it: a great, easy, handmade piece of art!

painters tape heart canvas art
Painters tape heart canvas art

My kids loved the outcome and they wanted me to make some simple shapes with painter’s tape, so I made the first letter of their name, a star and a heart…

Painters tape kids canvas art
Painters tape kids canvas art

I think they turned out quite nice! And they look great on their wall, too! And if you are more talented than me in arts, here are a few projects from Pinterest that really look professional!

diy canvas art
DIY canvas art (image source)
Canvas diy steps
Canvas diy steps (image source)
canvas diy metallic
Canvas art with metallic background (image source)

How To Make Easy Star Wars Pinatas and more ideas for a Star Wars Themed Birthday Party!!!

So, my son is one of the biggest Star Wars fans I know. He has a huge collection, and so it was a given that he would have a Star Wars Birthday Party. For two years in a row! I am going to write about those two parties, what we prepared to keep our guests (and us!) entertaint and I have to admit, we had a blast both times!

When I think about making pinatas, I always think that I can’t make one that is cute or with a character I like… for example, I could in no way allow kids to hit Yoda or another Yedi, pinata or not! So, when the time came to decide on the pinatas, we had these two ideas: the first one was a very easy Death Star Pinata and the second one a slightly more complicated but still easy Darth Vader Pinata.

Easy Death Star Pinata How-to

All you will need for this pinata is a white round paper lamp shade (I bought mine from IKEA), a piece of cardboard, grey spray paint, black marker, some fishing line or other kind of string and of course candy!!!

diy death star pinata
DIY Death Star Pinata

Assemble the lamp shade per instructions. Cover the bottom hole with a small piece of cardboard (secure with some tape). Go outside and spray paint the whole thing grey (if you find a grey lamp shade, by all means, buy that if you want, and just skip spray painting it!). With the black marker, add a few features (rectangles to the lampshade so it’s resembles to the Death Star. Fill the Death Star carefully with candy. Since it is made out of paper, take care not to overfill it or else it will bend or even rip. Add the string to the wire on top of the Death Star for hanging. All you need now is a stick and children to hit the pinata and get all the bounty!!!

Darth Vader Pinata How-to

To make this Pinata we really simply followed the image – steps from  adapting it slightly since I didn’t want a string pulled pinata. You will need a cardboard box (I use a cereal box or use some thicker cardboard), painters or other tape, craft glue and black crepe paper and a Darth Vader Mask Template. Print the Darth Vader Mask Template in a size that will suit you and your box and use it to cut the back and front of the box so they resemble the shape of the mask (you will end up with two mask-shaped cardboard pieces). Don’t worry too much about details, they will most likely get lost when you’ll add the fringes. Use the box’s sides or cut out a few 4″ wide strips (the longer the better) to use them to connect the two mask-shaped pieces to each other. To do that, you will need to use the adhesive tape like shown in the pictures from the blog, that is kind of the most tricky part, especially at the beginning. Don’t forget to fill your pinata with goodies before sealing it completely. Also, remember to use some string or rope to make a loop for hanging your pinata on top. When you have finished with the cardboard pinata, it is time to decorate it. Cut out 2” wide strips of the crepe paper and cut fringes into them. Try to make them as long as they need to be to cover the pinata from end to end in each row, so the result will be nicer looking. Now, with patience, glue all the strips onto the cardboard. Repeat on the back and the sides. This is the most time-consuming step for making the pinata, but it is a rather fun process. Lastly, cut out the Darth Vader mask highlights from your template and glue them to the front of your pinata. We painted Darth Vader’s eyes red, for a fierce result! Didn’t it turn out great?

diy darth vader pinata
DIY Darth Vader pinata

To make the invitation, I used the Star Wars Crawl Creator and finding the story to tell was so totally fun! For the rest of our first party I prepared green Yoda plates for the cake (just green plates where I attached some green Yoda ears I cut out with a stapler), a softball target shoot game (took an old big carton, painted the whole thing black, glued some rocket stickers and then we just cut out different sized circles, glued some Star Wars Villains on the circles for targets), a “Pin the lightsaber on the Yedi” game and we gave out  foam swords for everybody after the “Jedi Training”.

target game yoda plates
Target game and Yoda plates

At the end we did even have Darth Vader invade our party to steal the birthday cake, but fortunately all of our Yedi friends fought him off and so we could eat the cake after all!!! It was really fun and all of our guests and the birthday boy had a blast! The second party’s highlight was our Darth Vader Pinata of course, which did need to take a lot of hits before it released it’s bounty, being a true Darth Vader Pinata…

Using this same technique you can make virtually any Pinata you can think of… I for one am looking forward to making the next – girly this time – Birthday Pinata 🙂


Beach Craft Idea: Framed Sea Glass Dolphin

Finally, the beach treasures we gathered have all found their destination. Sea shells became a wonderful heart, our cute heart stones were put on display, and lastly, the sea glass pieces we gathered did find what they where supposed to become… it was rather hard to find out, I have to admit! But now I understand something I often heard or read about, when somebody would find something and just pick it up saying: “I’ll figure out later what I want to do with that!”.

brown sea glass
We found a wonderful sea glass piece… and held it up in front of the blue sky and bright sun of Greece

Well, that’s exactly what happened with the sea glass pieces. They were odd shaped and in different sizes, nothing I would do with them would look close to something good. Especially the two biggest pieces were giving me a headache. I washed them, put them in vinegar to loose some of the salt and shined them with a little baby oil as good as I could.

sea glass pieces
So many pieces of sea glass in different colors, shapes and sizes… what can somebody do with them?

I saw some ideas on Pinterest… they made super-cute seahorses, trees or flowers with them, but to do something like that I would need much more pieces and more uniform ones… and then suddenly I realised that, putting the two big pieces together, they would resemble a big fish tail… but what kind of fish? Maybe a shark? Or a dolphin? My kids went for the dolphin and slowly it really all came together! All of the sea shell parts seemed to belong in a certain dedicated spot. The fins, the beak and the eye, they were all there. I really was impressed.

Framed sea glass dolphin
Our framed sea glass dolphin

And I think that the result is really cute and they make a great themed set.

beach craft ideas framed sea treasures
Our three framed beach craft ideas

The three frames found their place above my kids’ desk… As I said before, the most important thing with these projects is that we gathered all pieces with my family and that they remind us of a beautiful summer! I for one, love them, and so do the little ones!!!

Beach Craft Idea: Framed Sea Shell Heart


(Διαβάστε το άρθρο στα ελληνικά στο PosimagineGR)

Time for my second summer project idea I had in mind this year: Framed Sea Shell Heart! It is super easy to make, just as my previous project I wrote about (Beach Craft Idea: DIY Framed Heart Shaped Stones). The only thing I did different is that I used a painted background I had laying around and it did fit into the frame so nice! I thought it was perfect as I used blue, green and white acrylic paints to paint it on a small canvas as I was thinking of the ocean.

I arranged the sea shells so they would create the outline of a heart, and I added one sea shell to each corner of the frame. Everything was glued in place with the silicon gun.


beach craft framed sea shell heart
Beach craft idea: framed sea shell heart

I really love the end result! It totally complements the other beach themed frame. Now I only need to make the third and final frame with sea glass… I really don’t have any idea right now, since the pieces we found are not that smooth and beautiful. But, the ultimate goal here is to create something that will remind us of the summer that has past, so perfection is not what I seek! What I love most about these project is the excitement in my kids’ eyes when they saw the outcome and the fact that they both pointed to the specific items they found by themselves. I think that is irreplaceable, what do you!!!


Beach Decor Idea: DIY Framed Heart Stones

(Διαβάστε το άρθρο στα ελληνικά στο PosimagineGR)

While summer is coming to its end – slowly here in Greece, thankfully – I am starting to implement some ideas I had before we started going to the beach. I love beach decor in houses and I saw some super cute heart shaped craft ideas on Pinterest that were perfect to make with the kids. I thought that they would make some great summer keepsakes as well.

framed beach heart stones
Framed beach heart stones

I am not that much of a swim-in-the-sea person but I just love days at the beach. I spend most of the time – when I am not enjoying the sun and sound of the ocean – walking along the beach and looking for things worth picking up. Such things are mainly sea glass pieces, heart-shaped rocks, sea shells, driftwood and so on. My son comes along when he is not in the sea playing, as he is a collector of all things rare and special! So we managed to gather a few pieces and they are just enough to make the things I wanted. Here is how to make the first of the super easy summer crafts I was going for: Framed Heart Stones.

The most time-consuming part is finding some nice pebbles in shape of a heart, naturally. My sweet boy always comes running to give me his hearts as soon as he finds them (and of course my heart melts every single time he does it). And I make sure to give both of my kids a couple of heart stones when I find some. So we ended up with nine colorful heart stones, perfect for our craft idea.

Heart shaped pebbles
The heart shaped stones we used for our craft

Craft Materials Needed To Make Framed Heart Stones

  1. A simple box frame (I prefered a white one, cause: beach!!). It was a very cheap one, to be honest!
  2. A glue gun or some other strong craft glue
  3. Heart-shaped stones or pebbles you found on the beach (you can buy some online, but I prefer imperfect self-gathered ones!)
  4. White sturdy cardboard and scissors
how to make framed pebbles
Easy how-to make framed pebbles instructions

Instructions On How To Make Framed Heart Pebbles

  1. Take apart your boxed frame. There should be a filler board inside the frame. Use it as a measure to cut the cardboard to the same size.
  2. Aling your pebbles on the cardboard. You can try to divide it into a grid if it helps you place the pebbles nicely apart.
  3. Heat up the silicon gun. Glue each pebble to its selected place (this should be made by an adult to keep those little fingers from burning!).
  4. Reassemple the frame, without using the glazing in front. I inserted the glazing behing the cardboard to keep the whole thing from moving to much.
  5. And that’s it! You can decorate your frame with some beach decorations, but personally, I like it simple and clean!
diy framed beach pebbles
DIY framed beach pebbles

I love how it turned out, it’s really so simple but beautiful and so full of love and memories! The next thing I want to make is a sea glass craft and a sea shell craft, both framed to make a set (I bought three identical white frames!!!). So stay tuned for more!!!

How to Decoupage A Plate And A Bottle – A Beginner’s Story!

First time decoupage
First time decoupage

(Διαβάστε το άρθρο στα ελληνικά στο PosimagineGR)

The first time I tried decoupaging (is that a word?) was a few days ago in a beginners class and we started decorating a plain plate and an old bottle and they turned out quite beautiful, allthough I really need a lot of practice in order to get it right! We used the materials described below. You don’t need to use special decoupage supplies, just experiment a little to find what other things work for you. My little one helped, too. But make sure to use child appropriate materials if you want your kids to help! So, as you can imagine, I don’t claim to know anything about decoupage! I will try to describe how we went about it on our first try, following our teachers instructions!

Decoupage supplies you need for decorating a plate and bottle

  • Paint brushes (a wide brush and a small brush preferably)
  • Paint (mocha color) – you can use acrylic paint, or some other liquid craft paint
  • Paint (white color) – you can use acrylic paint, or some other liquid craft paint
  • Clear Crackle paint
  • Mod Podge or clear, liquid decoupage glue
  • Old newspapers to protect our working surface
  • Paper towels
  • A small bowl with water
  • Paper napkin with bird motif and paper napkin with butterflies’ motif (or choose whatever motifs you like). Try to get napkins where the motif is on white background for better results. You can use special decoupage napkins and decoupage paper, but it is more expensive
  • Clear sealer paint
  • An old, clean and plain plate and an old clean bottle
  • Twine

First time decoupage
First time decoupage

Instructions for decoupaging a plate amd bottle

The steps might seem like too many, but they repeat themselves 🙂

  1. Lay out the newspapers on your working surface and arrange all your materials in front of you. Open the mocha paint container or empty some paint into a separate container.
  2. If your paint is thick and you can’t work well with it, first dip the brush into some water, stroke off the excess water and then dip the brush into the mocha paint and paint the surface of the plate and of the bottle. Don’t use to much paint, just enough to cover the surface with a nice layer of paint. If your plate or bottle has any details or tough to get to spots, use the small brush to paint them.
  3. Let the paint dry completely. Use a gentle hair dryer if you are in a rush. While drying rinse your brushes under running water. Dry them with a paper towel as good as you can.
  4. With the clean, wide brush, apply to the plate’s and bottle’s surface a thin layer of the crackle paint with quick strokes. Use the small one if necessary, too. Again, let it dry completely. Use hair dryer if needed. Rinse your brushes and dry them.
  5. While waiting take your napkins and carefully rip around the motifs you want to use. Don’t let any straight edges unripped and don’t use scissors. Separate the napkin’s layers (if you bought a 3-layered napkin, make sure to separate all of the layers). Keep only the layer with the motifs and set them aside.
  6. When your plate and bottle are dry, dip your wide brush into the white paint and with very quickly strokes apply one single layer of paint. Try to not repaint a spot, rather make quick small strokes to cover the whole surface. Use the small brush if necessary. Once again let it dry. As it dries, you will notice that small cracks are formed on the surface. That is the effect we were going for. You know the drill by now… use hair dryer, wash brushes, dry them, and wait a little longer. Close all paint containers or wash the containers you used. You won’t need the paints any more.
  7. Once dry, it’s time to apply the napkin motifs. Empty a small amount of glue into a clean container, or just use it directly from its container. Arrange your motif onto the plate to decide where you like what. When you are satisfied, lift one motif from the plate and apply glue to the spot you want the motif to go. Use any brush works for you. Apply only a layer of glue, not too much, but you don’t need to worry about the area you apply it to. Just make sure that you cover a little more area than your motif needs. Lay down the brush and pick up the motif, face up. Gently lay the motif onto the area you applied the glue. Using your fingers or a sponge, carefully straighten it out, making strokes from the center to the edges. Be careful not to rip the napkin, it is very delicate.
  8. Repeat the same thing with the other motifs and let everything dry. Apply another layer of glue over the motifs. Let everything dry. Do the same with the bottle. Rinse brushes and containers. Use glue and twine to decorate the bottle.
  9. Now it’s time for the final step. Just apply a layer of the clear sealer paint on the plate’s whole surface. You can apply a second layer after letting the first one dry completely for better protection. Let everything dry. As you can imagine, these are not to be used with food or drinks, since we didn’t use food-grade materials.

And there you have it! A nice plate to beautify your home or to give it to somebody who you care about!  The whole thing took us about two hours to complete. Isn’t the end result nice? Other decoupage ideas I am thinking of are decoupage on wood, furniture, boxes, vases and on Christmas I will try decoupage ornaments!